Brother International BAS-760 Instruction Manual - English - Page 18

[Bobbin counter setting] * Set up the producible quantity with the lower thread amount wound on the bobbin in the case. * Modification is possible only when the production quantity is displayed in the shunting position. *The producible piece number can be monitored by using the READ button. (1) Press READ button 0, and the producible piece number will be displayed. (2) Set up the producible number at BOBBIN FffiTTOT/9- 1 BOBBIN COUNTER Bobbin COUNTER switch O. (3) Press SET button 0 to complete setting. Lower thread amount Press SET button 0 when setting the same quantity after changing the bobbin. Check if the display shows the set-up quantity. 1F7FD,x1SET O pj - L - 1ALARM CODE * The maximum setting valve is 399; even if a larger valve is input, the setting is fixed at 399. 7 TINA% READ 1 PIECE COUNTER 1960 (4) When the bobbin counter setting display "0" after sewing, the machine head moves toward you (bobbin change position). After changing the bobbin, the counter will be set automatically. [Setting the PIECE COUNTER and the sewing speed] *Settings can be modified only when the production quantity is displayed with the machine in the shunting position. *The bobbin counter setting and piece counter setting are stored even after the power switch is turned off. COUNTER DEC FAST P5 - LTh- hr. ALARM CODE l&t7 -.129PIECE COUNTER SP SPEED ;5 7 2 4 x1000 n\L'iiE*11% BOBBIN CHANGE Setting the production quantity (1) The PIECE COUNTER is reset to display "0" when COUNTER DEC button m and FAST button pressed simultaneously. (2) Each time COUNTER DEC button (D is pressed once, the displayed value will decrease. >K Additions to the value are not available. 0 are Sewing speed Set sewing speed by turning the SPEED selector p before starting. Ex. Maximum speed for core-spun thread: 4,000 spm Maximum speed for polyester, spun thread: 3,500 spm X The sewing speed cannot be changed during the sewing operation, except after an interruption. -15-