Brother International BAS-760 Instruction Manual - English - Page 38
illustration
View all Brother International BAS-760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
CI Example of program [Example 1] 905 Jill 8 020 J ill rsosJEI Of 032 J El 111 [020J PAI E 11 0 LI © LI The program as shown in the illustration at left will be created. (1) Press the E key. The sewing clamp assembly will lower and the X, Y and STEP displays will show "0"; the command lamp F will illuminate. (2) Press the jog keys to move the sewing clamp assembly to the sewing start position. (3) When the needle tip is aligned with point ®, press the E key. This will program the first needle. (4) Input "020" E, use the jog keys to align the needle tip with point ®, and then press the key. The pitch between ®- ® will be tied at 3.2 mm. (Sew Q0-8 and o-©-® to securely fasten the bar tacking section.) (5) Next, input "032" LI move the needle to point CO, and then press the E key. The pitch between ®-© will be tied at 3.2 mm. (6) In the same way, tie the pitch between 0-0, 0-® and 0-0 at 3.2 mm in a straight line. (7) At point ®, input "020" D and at point ©, press the E key. This will tie the pitch between e -co at 2 mm. (8) In the same way, tie the pitch between 0-® at 2 mm. (9) At point 8, input "905" l] and at point ®, press the E key. The pitch between lb- © will be tied at 0.5 mm of needle racking. (10) At point ®, input "032" D and at point CD, press the E key. This will tie the pitch between C)- CD at 3.2 mm. (11) In the same way, tie the pitch between (1)-0, e -co and 0-O at 3.2 mm. (12) At point a, input "905" El and at point ®, press the E key. The pitch between 0- © will be tied at 0.5 mm of needle racking. (13) Input "111" (11. This completes the needle racking program. -35-