Brother International BAS-760 Instruction Manual - English - Page 53
Using, Switches
View all Brother International BAS-760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
USING THE DIP SWITCHES >K Always be sure to turn the power OFF when changing the settings of the DIP switches. The functions of the DIP switches are subject to changes without notification. 1. Functions of DIP switches on main circuit board a DIP switch 3 ON OFF I U DIP switch 1 D LI "DIP switch 2 U r 1 I 2 j • DIP switch 1 No. Functions when ON 1 Model number and program number are not checked. *2 0.2 second wait after completion of sewing. 3 *4 Operation of sewing clamp sensor is enabled. 5 6 If ON when power is ON, low machine speed is set for each needle at sewing start and end. 7 X-Y variation is displayed. 8 If ON when power is ON, machine speed is set to TEST mode. • DIP switch 2 * Normally ON; all others are normally OFF. No. Functions when ON 1 Operation of needle racking cylinder sensor is enabled. 2 2-OFF Tack speed setting: 3-OFF 2,000spm 2-OFF 3-ON 2,500spm 3 2-ON 3-OFF 2,800spm 2-ON 3-ON 3,000spm 4 X right direction feeding speed (folder machine) is reduced by 20%. 5 6 7 8 Y direction feed timing is increased for all data. • DIP switch 3: Nos. 1-8 are currently all spare. Blank DIP switches are spare. -50-