Brother International BAS-760 Instruction Manual - English - Page 24
stacker, roller, movement
View all Brother International BAS-760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
*Mode and stacker roller movement DIP SW 2-1 ON (Folder circuit board) OFF Continuous mode Alternating mode • DIP SW 2.1 ON . . . Use when sewing continuously on one side of the material only. The stacker roller selector switch is ignored. The selector switch LED for the right side stays illuminated. (The stacker roller always moves to the right side.) AUTO1 AUTO2 MANUAL LABEL AUTO1, Right AUTO1, Right 0 AUTO1, Right -0I AUTO1, Right AUTO2, Right 0 AUTO2, Right ill{ AUTO2, Right AUTO2, Right MANU, Right 0 MANU, Right -- 0 .• MANU, Right MANU, Right LABEL, Right -- 0I LABEL, Right Si LABEL, Right 01 LABEL, Right • DIP SW 2-1 OFF . . . Use when sewing alternately on the left and right of the material. The LED of the selector switch will illuminate to indicate the side on which the material is set. The labels will be attached to the right side material. The stacker operation will not alternate in MANUAL mode. The mode and stacker roller movement are reset when either the MODE switch or stacker switch is operated, and alternating mode commences from this point. AUTO1 AUTO2 MANUAL LABEL AUTO1, Right AUTO1, left AUTO2, Right 1 MANU, Right AUTO2, left 01 MANU, Right AUTO1, Right AUTO1, left AUTO2, Right AUTO2, left MANU, Right 0 MANU, Right LABEL, Right t Starts from here when stacker switch is pressed to the right. AUTO1, left t Starts from here when stacker switch is pressed to the left. LABEL, Right -- Id AUTO1, left 0 AUTOI , Right Mode Stacker roller movement -21-