Brother International BAS-760 Instruction Manual - English - Page 20

.0 (Pattern-alignment sewing: Select AUTO2] 1. Select AUTO2 with MODE switch 0. 2. Press STACKER button and the lamp will come on. 3. Place front material 6 under center blade assembly 0. 4. Place pocket material 0 over center blade assembly 5. Press right foot-switch (5 and maintain foot pressure. The center blade assembly 0 will descent a little further. If the pocket pattern and the front material ED are not in alignment, move the front material to align. After alignment, release right foot-switch 0 to the neutral position. Center blade assembly 0 will descend further more to check pattern-alignment. If alignment is not correct, press the right foot-switch (3 again so that the center blade assembly 0 is raised, and more the front material to align. 6. Press left foot-switch 6. The pocket material (I) will be folded on the folding group assembly. After the sewing clamp assembly moves, the front material and the pocket material are carried to the machine and sewing will start. 7. After completing sewing, the machine will return to the shunting position. MODE AUTOS MANUAL AUTOI IAPEL STEP 2,9,V13 - STACKER ON OFF 4 IPOSUts/P FOLDER RESET X If the STEP switch 0 is pressed at the same time as the FOLDER RESET p button is being pressed, the mode can be switched to the check mode for pocket folding. After the pocket material 0 is folded by the folder in step 6 above, the machine will return to standby mode. If alignment is not correct, press FOLDRE RESET button 0 twice to retern the foler to the former state. If it is correct, press left-foot switch 6 again. After the sewing clamp assembly moves, the front material 6 and the pocket material are carried to the machine and sewing will start. (RESET mode is entered when the power is switched on.) -17-