Brother International Innov-is NQ1600E Operation Manual - Page 12
Getting Ready
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Names of Machine Parts and Their Functions 1 Chapter GETTING READY Names of Machine Parts and Their Functions The names of the various parts of the machine and their functions are described below. Before using the machine, carefully read these descriptions to learn the names of the machine and their locations. Machine ■ Front view ■ Right-side/rear view a b c de f a b g l h k i j 1 Top cover Open the top cover to place the spool of thread on the spool pin. 2 Thread guide plate Pass the thread around the thread guide plate when threading the upper thread. 3 Bobbin winding thread guide and pretension disk Pass the thread under this thread guide and around the pretension disk when winding the bobbin thread. 4 Spool cap Use the spool cap to hold the spool of thread in place. 5 Spool pin Place a spool of thread on the spool pin. 6 Bobbin winder Use the bobbin winder when winding the bobbin. 7 LCD (liquid crystal display) Settings for the selected pattern and error messages appear in the LCD. (page B-9) 8 Operation panel From the operation panel, embroidery patterns can be selected and edited, and operations for using the machine can be selected (page B-4). 9 Operation buttons Use these buttons to operate the machine. (page B-4) 0 Embroidery unit Attach embroidery unit to embroider. (page B-26) A Thread cutter Pass the threads through the thread cutter to cut them. B Needle threader lever Use the needle threader lever to thread the needle. g c f d e 1 Handwheel Turn the handwheel toward you (counterclockwise) to raise and lower the needle. 2 Handle Carry the machine by its handle when transporting. 3 Presser foot lever Raise and lower the presser foot lever to raise and lower the presser foot. 4 Main power switch Use the main power switch to turn the machine on and off. 5 Power supply jack Insert the plug on the power cord into the power supply jack. 6 Air vent The air vent allows the air surrounding the motor to circulate. Do not cover the air vent while the machine is being used. 7 USB port (for a USB flash drive) In order to import patterns from a USB flash drive, insert the USB flash drive directly into the USB port. B-2