Brother International Innov-is NQ1600E Operation Manual - Page 28
the thread tension will be incorrect.
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Winding/Installing the Bobbin Lightly hold down the bobbin with your right hand g (1), and then guide the end of the thread around the tab of the needle plate cover with your left hand (2). While lightly holding down the bobbin with your right i hand (1), continue guiding the thread through the slit with your left hand (2). Then, cut the thread with the cutter (3). 1 Tab CAUTION • Be sure to hold down the bobbin with your finger and unwind the bobbin thread correctly, otherwise the thread may break or the thread tension will be incorrect. Memo • The order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated. Note • If the thread is not correctly inserted through the tension-adjusting spring of the bobbin case, it may cause incorrect thread tension. 1 1 Tension-adjusting spring Reattach the bobbin cover. j Insert the tab in the lower-left corner of the bobbin cover, and then lightly press down on the right side. While lightly holding down the bobbin with your right h hand (1), guide the thread through the slit in the needle plate cover (2) and lightly pull it with your left hand (3). • The thread enters the tension spring of the bobbin case. The bobbin threading is finished. Next, thread the upper thread. Continue with the procedure in "Upper Threading" on page B-19. Press k to unlock all keys and buttons. B-18