Brother International Innov-is NQ1600E Operation Manual - Page 89
Replacing the embroidery foot
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
■ Canceling the operation beep Press a to display the settings screen. Display page 5. b Set "Buzzer" to "OFF." c Care and Maintenance Use the included screwdriver to loosen the embroidery d foot screw, and then remove the embroidery foot. a b Replacing the embroidery foot c 1 Screwdriver 2 Embroidery foot 3 Embroidery foot screw Hold the embroidery foot in place with your right e hand, and then use the included screwdriver to securely tighten the embroidery foot screw. CAUTION • Only use embroidery feet designed specifically for this machine. Use of any other embroidery foot may result in injuries or damage to the machine. Press (Needle position button) once or twice to a raise the needle. Press . b • When the message "OK to automatically lower the presser foot? " appears on the LCD screen, press to continue. The screen changes, and all keys and operation buttons are locked (except ). Slowly lower the presser foot lever. f Raise the presser foot lever to check that the g embroidery foot is securely attached. Press h to unlock all keys and buttons. A MAINTENANCE AND TROUBLESHOOTING Raise the presser foot lever. c Appendix A-5