Brother International Innov-is NQ1600E Operation Manual - Page 70
Sewing split embroidery patterns
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Embroidery Applications Sewing split embroidery patterns c If necessary, edit the pattern, and press . Split embroidery patterns created with PE-DESIGN Ver.7 or later, or PE-DESIGN NEXT can be sewn. With split embroidery patterns, embroidery designs larger than the embroidery hoop are divided into multiple sections, which combine to create a single pattern after each section is sewn. For details on creating split embroidery patterns and for more detailed sewing instructions, refer to the Instruction manual included with PE-DESIGN Ver.7 or later, or PE-DESIGN d Press . NEXT. The following procedure describes how to read the split embroidery pattern shown below from USB flash drive and embroider it. • For details on editing patterns, refer to "Editing All Patterns" on page E-15. Memo • Press to rotate the pattern. a Insert the USB flash drive containing the created embroidery pattern, and then select the split split embroidery pattern to be embroidered. • For details on recalling patterns, refer to "Recalling from USB flash drive" on page E-35. e Press the section. "Start/Stop" button to embroider the pattern f When embroidering is finished, the following screen appears. Press . A screen appears so that a section of the split embroidery pattern can be selected. b Select section to be embroidered and press . A screen appears so that a section of the split embroidery pattern can be selected. g Repeat steps b through remaining sections of the f to embroider pattern. the • Select the sections in alphabetical order. • A maximum of 5 sections can be displayed in one page. If there are 6 or more sections in the pattern, press or to display the previous or next page. E-22