Brother International Innov-is NQ1600E Operation Manual - Page 30
pull it up.
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Upper Threading Slide the spool cap onto the spool pin. f Slide the spool cap as far as possible to the right, as shown, with the rounded side on the left. While holding the thread lightly with your right hand, g pull the thread with your left hand, and then pass the thread behind the thread guide cover and to the front. 1 Note • If the presser foot has been lowered and the shutter is closed, the machine cannot be threaded. Be sure to raise the presser foot to open the shutter before threading the machine. In addition, before removing the upper thread, be sure to raise the presser foot to open the shutter. • This machine is equipped with a window that allows you to check the position of the take-up lever. Look through this window and check that the thread is correctly fed through the take-up lever. 1 Thread guide cover Pass the thread under the thread guide plate, and then h pull it up. Press . j • When the message "OK to automatically lower the presser foot? " appears on the LCD screen, press to continue. The screen changes, and all keys and operation buttons are locked (except ). 1 Thread guide plate While using your right hand to lightly hold the thread i passed under the thread guide plate, pass the thread through the guides in the order shown below. Slide the thread behind the needle bar thread guide. k The thread can easily be slid behind the needle bar thread guide by holding the thread in your left hand, then feeding the thread with your right hand, as shown. 1 1 Needle bar thread guide Raise the presser foot lever. l B-20