Brother International Innov-is NQ1600E Operation Manual - Page 97
Upgrading your machine's software using USB flash drive
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Upgrading your machine's software using USB flash drive Upgrading your machine's software using USB flash drive You can use USB flash drive to upgrade software for your machine. When an upgrade program is available on our website at " http://support.brother.com/ ", please download the file(s) following the instructions on the website and steps listed below. Note • When using USB flash drive to upgrade the software, check that no data other than the upgrade file is saved on the USB flash drive being used before starting to upgrade. • Upgrade file can be recalled from a USB flash drive of any size. • Allow several seconds for machine to recognize flash drive connection. Note • When using USB flash drive equipped with an access indicator, the access indicator will begin flashing after the media is inserted into your machine, and may take about 5 to 6 seconds before the media is recognized. (The length of time varies depending on the USB flash drive.) Press . c The following screen appears. Memo • When the machine's software is upgraded, saved embroidery patterns will not be erased. Turn on the machine while pressing and holding a (Presser foot lifter button). Note • If an error occurred, a text error message will appear. At this time, turn the machine off, and then start the procedure again from step a. When the following screen appears, upgrading is d completed. A MAINTENANCE AND TROUBLESHOOTING The following screen appears. Remove the USB flash drive after turning off the e machine, and then turn on the machine again. Insert the USB flash drive into the USB port on the b machine. The media device should only contain the upgrade file. 1 USB port 2 USB flash drive Appendix A-13