Brother International Innov-is NQ1600E Operation Manual - Page 76
Using the automatic thread cutting function, END COLOR TRIM, Using the Thread Trimming Function JUMP
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Making Embroidery Adjustments Using the automatic thread cutting function (END COLOR TRIM) The automatic thread cutting function will cut the thread at the end of sewing each color. This function is initially turned on. To turn this function off, press key and then . This function can be turned on or off during embroidering. a Press . b Press function. to turn off the automatic thread cutting 1 Jump stitch Note • When this function is turned on, use the included ball point needle 75/11 for embroidering patterns with short jump stitches such as alphabet characters. Using other needles may cause the thread to break. ■ Selecting the Length of Jump Stitch Not to Trim When the thread trimming function is turned on, you can select the length of the jump stitch not to trim the thread. This function can be turned on or off during embroidering. Select a setting from 5 mm to 50 mm in 5 mm increments. * Your customized setting remains after turning the machine off and on. Press or to select the length of jump stitch. For example: Press to select 25 mm (1 inch) and the machine will not trim a jump stitch of 25 mm or less before moving to the next stitching. The key will display as • When one color thread is sewn, the machine will stop without cutting the thread. c Press to return to the original screen. Using the Thread Trimming Function (JUMP STITCH TRIM) The thread trimming function will automatically trim any excess thread jumps within the color. Embroidery frame (small) cannot be used. This function is initially turned on. To turn this function off, press key and then . This function can be turned on or off during embroidering. * Your customized setting remains after turning the machine off and on. CAUTION • The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage. Otherwise injury may result. Note • If design has many trims it is recommended to select a higher jump stitch trim setting in order to reduce the amount of excess tails on backside of fabric. • The higher number of the jump stitch length selected, the fewer number of times the machine will trim. In this case, more jump stitches will remain on the surface of the fabric. Adjusting the embroidery speed a Press to display the following screen. b Change the "Max Embroidery Speed" by pressing /. E-28 c Press to return to the original screen.