Brother International Innov-is NQ1600E Operation Manual - Page 64
Embroidering linked characters
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Editing All Patterns e Use to align the needle and the mark on the fabric, and begin embroidering the pattern. Note • To cancel the starting point setting and return the starting point to the center of the pattern, press . • Use to select a different starting point for embroidering. d Press . Embroidering linked characters Follow the procedure described below to embroider linked characters in a single row when the entire pattern extends beyond the embroidery frame. Example: Linking "DEF" to the characters "ABC" using embroidery frame 10 cm × 10 cm (4 inches × 4 inches) (sold separately with some models) a Select the character patterns for "ABC", and then press and . e Lower the embroidery "Start/Stop" button to foot and then press the begin embroidering. f After the characters are remove the embroidery embroidered, cut the frame, and then press threads, for "Finished embroidering". Note • For details on selecting character patterns, refer to "Selecting character patterns" on page E-2. b Press . 1 End of the embroidering g Reposition the fabric in embroidery frame right side of the letter "C" will be partially so that inside the the embroidery frame; being careful so letters remain straight and level. Then reattach frame again so that the remaining characters ("DEF") can be embroidered. c Press , and then press . The needle is positioned in the lower-left corner of the pattern. The embroidery frame moves so that the needle is positioned correctly. h Press and then press . E-16