Brother International Innov-is NQ1600E Operation Manual - Page 66
Embroidery Applications
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Embroidery Applications Embroidery Applications Sewing embroidery patterns which use appliqué When the color sewing order display shows (APPLIQUE MATERIAL), (APPLIQUE POSITION) or (APPLIQUE), follow the procedure below. 1. Creating an appliqué piece 2. Sewing the appliqué position on the base fabric 3. Affixing the appliqué piece to the base fabric 4. Embroidering the remainder of the pattern Required materials • Fabric for the appliqué piece • Fabric for the appliqué base • Stabilizer material • Craft glue • Embroidering thread Note • If (APPLIQUE MATERIAL), (APPLIQUE POSITION) or (APPLIQUE) appear in the thread color list, the correct names and numbers of the thread colors to be used will not appear. Select the thread colors depending on those in the appliqué pattern. ■ 1. Creating an appliqué piece a Select the appliqué pattern, embroidering screen. and then continue to the b Attach stabilizer appliqué fabric. material to the wrong side of the Hoop the fabric in the embroidery frame, and then attach the embroidery frame to the embroidery unit. 1 Applique material (cotton, felt, etc.) 2 Iron-on stabilizer c Thread the the presser machine with the embroidery foot lever, and then press the thread, lower "Start/Stop" button to sew the cutting line of the appliqué piece. The outline of the appliqué piece is sewn, and then the machine stops. 1 Outline of applique 2 Applique material d Remove the fabric for the appliqué piece from the embroidery frame, and then carefully cut along the sewn cutting line Note • If the appliqué piece is cut out along the inside of the cutting line, it may not be correctly attached to the fabric. Therefore, carefully cut out the appliqué piece along the cutting line. • After cutting out the appliqué piece, carefully remove the thread. E-18