Brother International Innov-is NQ1600E Operation Manual - Page 68
Using a frame pattern to make an appliqué
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Embroidery Applications ■ 4. Embroidering the remainder of the pattern a Change the embroidery thread according to the thread color sewing order, and then finish embroidering the remainder of the pattern. b Embroider the base fabric. same pattern from step a onto the c Apply a thin layer of fabric glue or a temporary spray adhesive to the rear of the appliqué created in step a. Attach the appliqué to the base fabric matching the shapes. Memo • Since glue may become attached to the presser foot, needle or needle plate, clean the glue off of the parts after finishing embroidering the appliqué pattern. • For best results, trim all excess threads each time the thread color is changed. Using a frame pattern to make an appliqué (1) You can use framed patterns of the same size and shape to create an appliqué. Embroider one pattern with a straight stitch and one pattern with a satin stitch. a Select a straight stitch frame pattern. Embroider the pattern onto the appliqué material, then cut neatly around the outside of the shape. d Select as the the satin stitch frame pattern appliqué. Embroider over the of the same shape appliqué and base fabric from step c to create the appliqué. Note • If you change the size or position of the patterns when selecting them, make a note of the size and location. E-20 1 Appliqué material