Brother International Innov-is NQ1600E Operation Manual - Page 87
If there is a screw in the needle plate cover, If there is no screw in the needle plate cover
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
■ If there is a screw in the needle plate cover 1 Use the L-shaped (or disc-shaped) screwdriver to remove the screw in the needle plate cover. Care and Maintenance Use the cleaning brush or a vacuum cleaner to remove h any lint and dust from the race and bobbin thread sensor and the surrounding area. 2 Grasp both sides of the needle plate cover, and then slide it toward you. 1 Cleaning brush 2 Race 3 Bobbin thread sensor • Do not apply oil to the bobbin case. Insert the bobbin case so that the mark on the i bobbin case aligns with the mark on the machine. a 1 Needle plate cover ■ If there is no screw in the needle plate cover 1 Grasp both sides of the needle plate cover, and then slide it toward you. a A b a b a 1 Needle plate cover Remove the bobbin case. g Grasp the bobbin case, and then pull it out. • Align the and marks. MAINTENANCE AND TROUBLESHOOTING 1 1 Bobbin case 1 mark 2 mark 3 Bobbin case • Make sure that the indicated points are aligned before installing the bobbin case. Appendix A-3