Brother International Innov-is NQ1600E Operation Manual - Page 41
Using the embroidery sheet
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Lay the fabric right side up on top of the outer frame. b Re-insert the inner frame making sure to align the inner frame's with the outer frame's . Preparing the Fabric Memo • After stretching the fabric, lightly tapping it should produce a drum-like sound. • Stretch the fabric from all four corners and all four edges. While stretching the fabric, tighten the frame adjustment screw. Return the frame adjustment screw to its initial e position. 1 Inner frame's 2 Outer frame's 3 Frame adjustment screw Slightly tighten the frame adjustment screw, and then c remove the slack in the fabric by gently pulling on the edges and corners. Do not loosen the screw. B Memo • You can use the included screwdriver when you loosen or tighten the frame adjustment screw. STARTING TO EMBROIDER Gently stretch the fabric taut, and tighten the frame d adjustment screw to keep the fabric from loosening after stretching. • After stretching the fabric, make sure the fabric is taut. ■ Using the embroidery sheet When you want to embroider the pattern in a particular place, use the embroidery sheet with the frame. With a chalk pencil, mark the area of the fabric you a want to embroider. • Make sure the inside and outside frames are even before you start embroidering. 1 Embroidery pattern 2 Mark 1 Outer frame 2 Inner frame 3 Fabric Basic operations B-31