Brother International Innov-is NQ1600E Operation Manual - Page 37
Removing the embroidery unit
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Attaching the Embroidery Unit Press , and then press . b 1 1 Carriage CAUTION • Keep your hands and foreign objects away from the embroidery carriage and frame when the machine is embroidering. Otherwise, injury may result. Note • If the machine was not initialized correctly, the initial screen may not appear. This is not a sign of a malfunction. If this occurs, turn the machine off, then on again. • A confirmation message to lower the framesecuring lever after the carriage moves to its initial position is displayed. Continue with pattern selection and remember to lower the framesecuring lever when the embroidery frame is attached. The screen for selecting the embroidery pattern type is displayed. The embroidery carriage moves into a position where it can be stored. Turn off the machine. c CAUTION • Always turn off the machine before removing the embroidery unit. It may cause malfunctions if removed when the machine is turned on. Hold the release button on the bottom left of the d embroidery unit, and slowly pull the embroidery unit to the left. 1 STARTING TO EMBROIDER B • For details on the embroidery patterns, refer to "Viewing the LCD" on page B-9. ■ Removing the embroidery unit Make sure that the machine is completely stopped and follow the instructions below. Remove the embroidery frame. a • For details on removing the embroidery frame, refer to "Attaching the Embroidery Frame" on page B-33. 1 Release button CAUTION • Do not carry the embroidery unit by holding the release button compartment. Basic operations B-27