Brother International IntelliFax-2800 Users Manual - English - Page 64

Setup Send, Before You Begin, Using the ADF (Automatic Document Feeder) - paper jam

Page 64 highlights

6 Setup Send 6 Before You Begin Before you begin sending faxes, please be sure to read all the instructions and cautions listed below for placing originals in the automatic document feeder. Using the ADF (Automatic Document Feeder) I Documents must be between 5.8 and 8.5 inches wide and between 3.9 and 14.1 inches long. Your machine can scan an image only 8.15 inches wide, regardless of how wide the paper is. Originals are face down I The FAX-2800 and MFC-4800's ADF (automatic document feeder) can hold up to 20 pages, feeding each one individually through the machine. Use standard (17 lb-24 lb) paper when using the ADF. If you're using heavier paper, feed each sheet individually to prevent paper jams. I The FAX-2900 and MFC-3800's ADF can hold up to 30 pages, if you stagger the pages and meet the following conditions: Temperature: Humidity: Paper: 68° F - 86° F (20° C - 30° C) 50% - 70% Xerox 4200 or equivalent (20LB/LTR). I Fan the paper, and then stagger the pages in the ADF as shown: Approx. 1/2 inch I Make sure you insert documents face down, top edge first. I Adjust the paper guides to fit the width of your document. I Open the document tray by pulling it toward you (1), then unfold the extension (2). 6-1 SETUP SEND

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150

6 - 1
SETUP SEND
6
6
Setup Send
Before You Begin
Before you begin sending faxes, please be sure to read all the instructions and
cautions listed below for placing originals in the automatic document feeder.
Using the ADF (Automatic Document Feeder)
Documents must be between
5.8 and 8.5 inches wide and
between 3.9 and 14.1 inches
long. Your machine can scan
an image only 8.15 inches
wide, regardless of how wide
the paper is.
The
FAX-2800 and MFC-4800
s ADF
(automatic document feeder) can hold
up to 20 pages, feeding each one individually through the machine.
Use standard (17 lb
24 lb) paper when using the ADF. If you
re using heavier
paper, feed each sheet individually to prevent paper jams.
The
FAX-2900 and MFC-3800
s ADF
can hold up to 30 pages, if you stagger
the pages and meet the following conditions:
Temperature:
68
°
F - 86
°
F (20
°
C - 30
°
C)
Humidity:
50% - 70%
Paper:
Xerox 4200 or equivalent (20LB/LTR).
Fan the paper, and then
stagger the pages in the
ADF as shown:
Make sure you insert documents
face down, top edge first
.
Adjust the paper guides to fit the width of your document.
Open the document tray by
pulling it toward you (
1
),
then unfold the extension
(
2
).
Originals are
face down
Approx. 1/2 inch