Brother International IntelliFax-2800 Users Manual - English - Page 91

Remote Commands Follow the commands below to access features remotely. When you call the FAX/MFC and enter your Remote Retrieval Access Code (1 5 9 ), the system will signal you with two short beeps to enter a remote command. Remote Commands Operation Details 95 Changing Fax Forwarding /Paging setting 1 OFF 2 Fax Forwarding 3 Paging 4 FAX FWD No. If you hear one long beep, the change is accepted. If you hear three short beeps, you cannot change it because the conditions have not been met (Example: registering paging number). You can register your fax forwarding number by using 4. FAX FWD NO. (see page 9-5). Once you have registered the number, the FAX/MFC will change automatically to FAXFWD:ON mode. 6 Fax Storage ON You can turn FAX STORAGE to ON or OFF. 7 Fax Storage OFF 96 Retrieve a fax 2 Retrieve all faxes Enter the number of a remote fax machine to receive stored fax messages. (See page 9-5.) 3 Erase faxes from the memory If you hear one long beep, you can erase fax message(s) from the memory. 97 Check the Receiving Status 1 FAX You can check whether your FAX/MFC has received any faxes. If yes, you will hear one long beep. If no, you will hear three short beeps. 98 Change the Receive Mode 1 TAD: ANSWER MACH. 2 FAX/TEL If you hear one long beep, you can change the Receive Mode. If you hear three short beeps, you cannot change it. 3.FAX ONLY 90 Exit After a long beep, you can exit Remote Retrieval. REMOTE FAX OPTIONS 9-4