Brother International IntelliFax-2800 Users Manual - English - Page 9

Quick Reference Guide Sending Faxes Automatic Transmission 1 Place the original face down in the ADF. 2 Enter the fax number using One Touch (FAX models only), Speed Dial, Search or the dial pad. 3 Press Fax Start. Sending a Cover Page 1 Place the original face down in the ADF. 2 Press Menu/Set, 2, 2, 8. 3 When NEXT FAX ONLY? appears, press Menu/Set. 4 Press or to select ON (or OFF), and then press Menu/Set. 5 Press or to select a comment, and then press Menu/Set. 6 Enter two digits to indicate the number of pages being sent, and then press Menu/Set. 7 Press 1 to select additional settings -OR-Press 2 if you are ready to fax. 8 Enter the fax number. 9 Press Fax Start. Real Time Transmission You can send faxes in real time. 1 Place the original face down in the ADF. 2 Press Menu/Set, 2, 2, 6. 3 Press or to select ON, and then press Menu/Set-OR- For the next transmission only, press or to select NEXT FAX ONLY, and then press Menu/Set. 4 For the next fax only, press or to select ON, and then press Menu/ Set. 5 Press 1 to select additional settings -OR-Press 2 to fax. 6 Enter the fax number. 7 Press Fax Start. Receiving Faxes Select Receive Mode Press Receive Mode to select FAX ONLY, FAX/TEL, TAD:ANSWER MACH. or MANUAL. If you select FAX/TEL, make sure to set Ring Delay and F/T Ring Time. Manual Reception 1 Pick up the handset. 2 Press Fax Start if you hear fax tones (beeps). 3 When the LCD shows RECEIVING, replace the handset. Q U I C K R E F E R E N C E G U I D E vii