Brother International MFC 8840D Quick Setup Guide - English - Page 41

Step 2 Installing the Driver & Software For Network Interface Cable Users (For Windows® 98/98SE/Me/NT/2000 Professional/XP) F Select Network Interface, and then click Next. If the MFC is configured for your network: Select the MFC from the list and then click Next. → Go to M G Select Standard, and then click Next. The application files will be copied to your computer. J Click Configure IP Address. If you want to install the PS driver, select Custom and then follow the on-screen instructions. When the Select Components screen appears, check PS Printer Driver, and then continue following the on-screen instructions. H Select Search the network for devices and choose from a list of discovered devices (Recommended), and then click Next. K Enter the proper IP Address information for your network, and then click OK. (e.g. Enter 192.168.0.103 for IP Address) L Click Next. If you see the following screen, click OK. I If the MFC is un-configured for your network: Select the APIPA or un-configured device from the list and then click Next. → Go to J 40 See the For Administrator section of this guide or the NC-9100h User's Guide located on the CDROM for more network configuration information. Windows® 98/98SE/Me/2000/XP Users ➝ Go to N Windows NT® Users ➝ Go to Q