Brother International MFC 8840D Quick Setup Guide - English - Page 8

Setting Up the Machine 5 Install Power Cord and Phone Line Do not connect the Parallel or USB cable yet. 1 Make sure that the power switch is off. Connect the AC power cord to the machine. If you are sharing one phone line with an external telephone, connect it as shown below. Windows® USB Windows® Parallel Windows NT® 4.0 Parallel Windows® Network Macintosh® USB 2 Plug the AC power cord into an AC outlet. Turn the power switch on. If Check Scan Lock appears on the LCD, immediately release the scanner lock and press Stop/Exit. 3 Connect one end of the telephone line cord to the jack on the MFC marked LINE and the other end to a modular wall jack. If you are sharing one phone line with an external telephone answering device, connect it as shown below. Please set the receive mode to External TAD. For more details, see "Connecting the MFC" in Chapter 1 of the User's Guide. TAD Warning ■ The MFC must be grounded using a 3-prong plug. ■ Since the MFC is grounded through the power outlet, you can protect yourself from potentially hazardous electrical conditions on the telephone network by keeping the power to your MFC on when you connect it to a telephone line. Similarly, you can protect yourself when you want to move your MFC by disconnecting the telephone line first and then the power cord. TAD 7 Macintosh® Network For Administrators