Brother International PC-420PRW Users Manual - English - Page 142
performance may suffer. For a new, tangled, the needle may break or sewing
View all Brother International PC-420PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX CONTENTS Turn the balance wheel toward you until the 3 tip of the shuttle hook aligns with the edge of the race shelf. 1 3 4 2 1 Shuttle race 2 Shuttle 3 Edge of the shuttle race 4 Tip of the shuttle hook • Be sure to turn the balance wheel toward you. Turning the balance wheel away from you may damage the machine. Remove the shuttle. 4 Grasp the shuttle, and then pull it out. Check that the edge of the race shelf is 6 positioned as in step 3, and then insert the shuttle so that the projection on the shuttle aligns with the spring. 1 2 2 1 1 Projection 2 Spring Insert the tabs on the needle plate cover into 7 the needle plate, and then slide the cover back on. 1 1 Shuttle Use the cleaning brush or a vacuum cleaner to 5 remove any lint and dust from the race and its surrounding area. APPENDIX 1 2 1 Cleaning brush 2 Shuttle race • Do not apply oil to the shuttle. CAUTION ● Never use a shuttle that is scratched, otherwise the upper thread may become tangled, the needle may break or sewing performance may suffer. For a new shuttle (part code: XC3153-051), contact your nearest authorized service center. ● Be sure that the shuttle is correctly installed, otherwise the needle may break. INDEX 136