Brother International PC-420PRW Users Manual - English - Page 81
Start sewing., When sewing is finished, cut the thread., Changing the needle position
View all Brother International PC-420PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Start sewing. 5 • For details, refer to "Starting to sew" (page 49). • For details on sewing reverse/reinforcement stitches, refer to "Securing the stitching" (page 51). When sewing is finished, cut the thread. 6 • For details, refer to "Cutting the thread" (page 53). ■ Changing the needle position The needle position used as the baseline is different for the straight stitch (left needle position) and the straight stitch (center needle position). 1 2 1 Straight stitch (left needle position) 2 Straight stitch (center needle position) When the stitch width of the straight stitch (left needle position) is set to its standard setting (0.0 mm), the distance from the needle position to the right side of the presser foot is 12 mm (1/2 inch). If the stitch width is changed (between 0 and 7 mm (1/4 inch)), the needle position will also change. By changing the stitch width and sewing with the right side of the presser foot aligned with the edge of the fabric, a seam allowance can be sewn with a fixed width. 1 0.0 2.0 5.5 7.0 3 4 5 6 2 1 Stitch width 2 Distance from the needle position to the right side of the presser foot 3 12.0 mm (1/2 inch) 4 10.0 mm (3/8 inch) 5 6.5 mm (1/4 inch) 6 5.0 mm (3/16 inch) APPENDIX INDEX • For details, refer to "Adjusting the stitch width" (page 55). Basic Stitching 75