Brother International PC-420PRW Users Manual - English - Page 92
Inserting a side zipper, hits the presser foot, the needle may
View all Brother International PC-420PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
UTILITY STITCHES CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Select stitch 3 . 6 • For details, refer to "Selecting stitching" (page 68). CAUTION ● When using zipper foot "I", be sure to select the straight stitch (center needle position), and slowly turn the balance wheel toward you to check that the needle does not touch the presser foot. If a different stitch is selected or the needle hits the presser foot, the needle may bend or break. Topstitch around the zipper. 7 1 3 2 4 Inserting a side zipper Stitching is sewn on only one piece of fabric. Use this type of zipper for side openings and back openings. 1 2 3 1 Stitching 2 Right side of fabric 3 End of zipper opening The following procedure will describe how to stitch on the left side, as shown in the illustration. Attach zigzag foot "J" and sew straight 1 stitches up to the zipper opening. With the right sides of the fabric facing each other, sew reverse stitches after reaching the zipper opening. • For details, refer to "Basic Stitching" (page 74). Using a basting stitch, continue sewing to the 2 edge of the fabric. 1 APPENDIX 1 Stitching 2 Right side of fabric 3 Basting stitching 4 End of zipper opening CAUTION ● When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend or break. Remove the basting stitching. 8 2 3 4 1 Basting stitching 2 Reverse stitches 3 Wrong side of fabric 4 End of zipper opening Press open the seam allowance from the 3 wrong side of the fabric. 1 INDEX 1 Wrong side of fabric 86