Brother International ULT-2001 Users Manual - English - Page 132

Bar Tacks Use bar tacks to reinforce areas that will be subject to strain, such as pocket corners. 1. Select . CONTENTS 1 - 2 - 3 - 4 - 5 - 2. Attach buttonhole foot "A" and set the scale to the length of the bar tack you wish to sew. 6 - 1 Note Bar tacks can be between 5 mm (3/16 inch) and 30 mm 2 (1-3/16 inch). Bar tacks are usually between 5 mm (3/16 7 - 3 inch) and 10 mm (3/8 inch). 1 Presser foot scale 2 Completed measurement 3 5 mm (3/16 inch) 8 - CAUTION Be sure the thread passes under the presser foot. 5 3. Set the fabric so that the pocket moves towards you 9 - during sewing. 6 ?! CAUTION • Slide the outside frame of the buttonhole foot back- ward as far as possible as shown in the illustration, making sure that there is no gap behind the part of the foot marked "A". If the buttonhole foot is not slid back as far as possible, the bar tack will not be sewn to the correct size. • Pass the thread underneath the presser foot. Sewing Utility Stitches 3-59 Index