Brother International ULT-2001 Users Manual - English - Page 135

CONTENTS 4. Turn the balance wheel to check that the needle goes into each hole correctly. Then, gently hold the end of the upper thread and start sewing. The machine stops automatically when sewing is finished. 1 - 6 CAUTION 2 - Make sure the needle does not strike the button during sewing. The needle may break, leading to injury. Note • To attach the button more securely, repeat the process. • If the needle does not reach the holes on the left side, adjust the stitch width. 3 - 4 - 5. From the wrong side of the fabric, pull the end of the bobbin thread to pull the upper thread through to the wrong side of the fabric. Tie the two thread ends together and cut the threads. 5 - 6 - 6. When sewing is completed, be sure to return the feed dog position switch to its original position. 1 Feed dog position switch 7 - 1 8 - s Attaching 4 Hole Buttons Sew the two holes closest to you. Then raise the presser 9 - foot lever and move the fabric so that the needle goes into the next two holes, and sew them in the same way. ?! 3-62 Sewing Utility Stitches Index