Brother International ULT-2001 Users Manual - English - Page 179

Attaching Embroidery Foot "Q" CAUTION • Always turn off the main power switch when attaching a presser foot. You may accidentally press the "Start/Stop" button, resulting in injury. • Be sure to use embroidery foot Q when doing embroidery. The needle may strike the presser foot, causing the needle to bend or break and resulting in injury. CONTENTS 1 - 2 - 1. Press the "Needle Position" button to raise the needle, and then turn off the power. 2. Raise the presser foot lever. 3 - 1 1 2 1 2 5-4 4 - 3. Push the black button on the presser foot holder and remove the presser foot. 5 - 1 Presser foot holder 6 - 4. Use the included screwdriver to loosen the screw of the presser foot holder, then remove the presser foot 7 - holder. 8 - 5. Set embroidery foot "Q" on the presser foot bar so that the arm of embroidery foot "Q" is in contact with the back of the needle holder, then use the included screwdriver to firmly tighten the screw. 9 - ?! CAUTION Use the included screwdriver to firmly tighten the screw of the presser foot holder. If the screw is loose, the needle may strike the presser foot, resulting in injury. Embroidery Index