Brother International ULT-2001 Users Manual - English - Page 59
Do not press the Thread Cutter button when there, thread or break the needle and damage the ma
View all Brother International ULT-2001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
CONTENTS 7. Press the "Start/Stop" button to begin sewing. 1 - 5 * Guide the fabric lightly by hand. 6 2 - 8. Press the "Start/Stop" button again to stop sewing. 3 - 4 - 5 - 9. Press the "Thread Cutter" button to trim the threads. * The needle will return to the up position automatically. CAUTION Do not press the "Thread Cutter" button after the threads have been cut. Doing so could tangle the thread or break the needle and damage the machine. 6 - 7 - CAUTION • Do not press the "Thread Cutter" button when there is no fabric set in the machine or during machine operation. The thread may tangle, resulting in damage. • When cutting thread thicker than #30, nylon thread, or other decorative threads, use the thread cutter on the side of the machine. 8 - 9 - ?! 10.When the needle has stopped moving, raise the presser foot and remove the fabric. Note This machine has a display to warn you when the bobbin 2-2 thread has run out. If the warning displays, re-thread the machine immediately. Getting Ready to Sew Index