Brother International ULT-2001 Users Manual - English - Page 307

17. This message is displayed when the embroidery unit is attached and the power is turned on with the needle in the down position. 18. This message is displayed when the buttonhole lever is up, a buttonhole stitch is selected, and the "Start/ Stop" button or "Reverse/Reinforcement Stitch" button is pushed. 19. This message is displayed when there are too many characters and the curved character configuration is impossible. 20. This message is displayed when the machine is in embroidery mode and the combined character pattern is too large for the embroidery frame. You can rotate the pattern 90 degrees and continue combining characters. 21. This message is displayed when there is no stitch or embroidery pattern selected and the "Start/Stop" button, the "Reverse/Reinforcement Stitch" button, or is pressed. CONTENTS 22. This message is displayed when the machine is in embroidery mode, and the character pattern combination is too large to fit in the embroidery frame. 1 - 2 - 23. This message is displayed when the machine is in embroidery mode and the medium frame is attached, and the selected pattern does not fit in the medium frame. 3 - 4 - 24. This message is displayed when the machine is in embroidery mode and the small frame is attached, and the selected pattern does not fit in the small frame. 5 - 6 - 25. This message is displayed when the machine is in embroidery mode and the embroidery unit tries to initialize while the embroidery frame is attached. 7 - 8 - 26. This message is displayed when the machine is ready to sew an embroidery pattern, and the "Start/Stop" button is pushed while the embroidery frame is not attached. 9 - ?! 9-12 Troubleshooting Index