Brother International ULT-2001 Users Manual - English - Page 52

CONTENTS 5. Set the low shank adapter for the walking foot that came with your machine on the presser foot shaft, and push it up as far as possible. Tighten the screw securely with the screwdriver. 1 - CAUTION Use the screwdriver to tighten the screw securely. If the screw is loose, the needle may strike the presser foot and cause injury. 2 - 6. Set the operation lever of the walking foot so that the 3 - fork surrounds the needle clamp, and set the walking foot on the presser foot shaft. 6 4 - 5 - 7. Lower the presser foot lever, insert the screw (large) for the walking foot, and tighten the screw securely 6 with the screwdriver. 6 - CAUTION • Use the screwdriver to tighten the screw securely. If the screw is loose, the needle may strike the presser foot and cause injury. • Be sure to turn the balance wheel toward the front of the machine to check that the needle does not strike the presser foot. If the needle strikes the presser foot, injury may result. 7 - CAUTION When sewing with the walking foot, sew at medium to low speeds. 8 - 9 - ?! Setting Up 1-41 Index