Canon FS10 FS10/FS11/FS100 Instruction Manual - Page 35
Quick Start Function, Reviewing and Deleting the Last Scene Recorded, NOTES, IMPORTANT - camcorder review
UPC - 013803092523
View all Canon FS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
NOTES • Keep at least 1 m (3.3 ft.) away from the subject. At full wide angle, you can focus on a subject as close as 1 cm (0.39 in.). • When [ZOOM SPEED] is set to [ VARIABLE]: - When you use the T and W buttons on the wireless controller or LCD panel, the zoom speed will be constant at [ SPEED 3]. - The zoom speed will be faster in record pause mode than when actually recording. Quick Start Function When you close the LCD panel with the camcorder on, the camcorder enters the standby mode. In standby mode the camcorder consumes only about half the power used when recording, saving energy when you are using a battery pack. Additionally, when you open the LCD panel, the camcorder is ready to start recording in approximately 1 second, ensuring you do not miss important shooting opportunities. ( 24) 1 With the camcorder on and in a recording mode, close the LCD panel. A beep will sound and the indicator will change to orange to indicate the camcorder entered the standby mode. 2 When you wish to resume recording, open the LCD panel. Within less than 1 second, the indicator will return to green and the camcorder will be ready to record. IMPORTANT Do not disconnect the power source during standby mode (while the indicator is lit in orange). NOTES • If you close the LCD panel under some circumstances (for example while recording, while a menu is being displayed, while the battery charge is low, or while the memory card slot cover is open), the camcorder may not enter the standby mode. Check that the indicator changes to orange. • The camcorder will shut off if left in standby mode for 10 minutes, regardless of the [POWER SAVE] setting ( 80). Press ON/OFF to turn on the camcorder. • You can select the length of time until shut-off or turn off the Quick Start function with the [QUICK START] setting ( 81). Reviewing and Deleting the Last Scene Recorded Even in mode you can play back the last scene recorded in order to check it. You can also delete the scene while reviewing it. ( 24) 35