Canon PowerShot SX160 IS User Guide - Page 107
Enter <, > mode., Configure the setting., Adjusting the Flash Output
View all Canon PowerShot SX160 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Specific Shutter Speeds and Aperture Values ( Mode) • : Manual • Calculation of standard exposure is based on the specified metering method (= 82). Adjusting the Flash Output Choose from the three flash levels in mode. Still Images 1 Enter mode. zzSet the mode dial to . 2 Configure the setting. zzPress the button, choose [X] in the menu, and adjust the setting by either pressing the buttons or turning the dial (=37). XXOnce the setting is complete, [X] is displayed. • You can also set the flash level by accessing (=38) and choosing [Flash Output] in [Flash Settings] on the [4] tab. • You can set the flash level in or mode by accessing (=38), choosing [Flash Settings] on the [4] tab, and then setting [Flash Mode] to [Manual]. • You can also access the [Flash Settings] screen as follows. - When the flash is up, press the button and immediately press the button. 107