Canon imageCLASS MF4450 imageCLASS MF4570dn/MF4450 Basic Operation Guide - Page 92
Sending a Fax Abroad (Adding Pauses), access code.
View all Canon imageCLASS MF4450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
5 Use the numeric keys to enter the required numbers for the information service. Specify destination. 01/01/2011 12:52AM 012XXXXXXT3456 Start Receiving Resolution: 200 x 1... 6 If you want to receive faxes, press [ ] (Start). NOTE Telephone call The external telephone must be connected to this machine. Check the dial tone before entering a fax number. If you enter the number before checking the dial tone, the call may not be connected or the wrong number may be dialed. Sending a Fax Abroad (Adding Pauses) When sending a fax abroad, you may need to insert a pause within the number. When communicating abroad, the signal distance is extreme and the signal route complicated. Because of this, you may not be able to connect to a recipient by dialing an international telephone identification number, country code, and the recipient's fax number at the same time. In this case, add a pause after the international telephone identification number. Because adding a pause provides a point where wait time can be added when dialing, it is easier to connect to the recipient. Keys to be used for this operation Pause FAX Numeric keys Start 1 Place documents. "Placing Documents" (ˠP.2-4) "Document Requirements " (ˠP.2-2) 2 Press [ ]. 3 Set scanning settings for documents as needed. "Fax Settings" (ˠP.6-3) 4 Use the numeric keys to enter the international access code. For details on international access codes, contact your telephone company. Fax Number 012 (Apply: Press OK) 5 Press [ needed. ] (Pause) to enter a pause as - The letter indicating a pause is displayed. - The default pause is two seconds*. To change the pause time, see "Pause Time" (ˠP.6-21). - When you are adding pauses consecutively, press [ ] (Pause) again. * The default value varies depending on the country where you are using the machine. Fax Number 012P (Apply: Press OK) 6 Enter the country code, the area code, and the fax/telephone number using the numeric keys. Fax Number 012p031XXXXXX (Apply: Press OK) 7 Press [ ] (Pause) to add a pause at the end of the fax/telephone number as needed. • The letter is displayed at the end of the fax number. • The pause added to the end of the number is fixed at 10 seconds. Fax Number 012p031XXXXXXP (Apply: Press OK) 8 Press [ ] (Start). Using the Fax Functions 6-8