Canon imagePROGRAF iPF6300S iPF6300S Basic Guide No.2 - Page 4

Troubleshooting The printer stops during a print job Phenomenon Status Corrective Action An error message is shown on the An error message is displayed Display Screen during printing. Check the error message and take action as necessary. (→ , Error Messages) The last portion of roll paper was Remove the used roll and insert a new roll. used during a print job, and paper (→ , Removing the Roll from the Printer) could not be advanced because (→"Removing Rolls from the Roll Holder," User's the trailing edge is taped to the roll. Guide) (→"Loading and Printing on Rolls," User's Guide) The printer ejects blank, unprinted The leading edge of the roll paper paper was cut to straighten it. The leading edge of rolls may be cut to straighten it if you have selected Trim Edge First > On or Automatic in the Control Panel menu. (→"Cutting the Leading Edge of Roll Paper Automatically," User's Guide) The Printhead nozzles are clogged. Print a test pattern to check the nozzles and make sure the Printhead is in good condition for printing. (→"Checking for Nozzle Clogging," User's Guide) A print job was received from an incompatible printer driver. Use the correct imagePROGRAF printer driver for the printer and try printing again. The printer is damaged. Contact your Canon dealer for assistance. 4