Canon imagePROGRAF iPF6300S iPF6300S Basic Guide No.2 - Page 41
Head Posi. Adj.
View all Canon imagePROGRAF iPF6300S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Error Messages Error Message Cannot adjust printhead. Maximum jobs stored. Mail box full. Now printing without saving data. The mail box is full. Mail box nearly full. Mail box full. Delete unwanted data Multi-sensor error Cause Corrective Action The Printhead nozzles are clogged. Execute Head Posi. Adj. again, as follows. 1. Press the OK button to clear the error. 2. Print a test pattern to check the nozzles. (→"Checking for Nozzle Clogging," User's Guide) 3. Clean the Printhead if the nozzles are clogged. (→ , If Printing is Faint) 4. Execute Head Posi. Adj. again. (→ , If Vertical Lines are Warped or Colors are Misaligned) The Printhead cannot be aligned; highly transparent film is loaded. Press the OK button to clear the error. We recommend using a type of paper that you often use, other than film, for Printhead adjustment. (→ , If Vertical Lines are Warped or Colors are Misaligned) 100 jobs are stored in the personal Delete unneeded jobs stored in personal boxes. box. (→"Deleting Saved Jobs," User's Guide) No more space is available on the After printing, this message is cleared. printer's hard disk, so jobs are now printed without saving them. (Print Delete unneeded jobs stored in personal boxes. jobs can no longer be saved on the (→"Deleting Saved Jobs," User's Guide) hard disk.) There is no more space on the printer's hard disk. Press the Stop button and stop printing. Delete print jobs from the queue. (→"Managing the Job Queue (Deleting or Preempting Other Jobs)," User's Guide) Delete unneeded jobs stored in personal boxes. (→"Deleting Saved Jobs," User's Guide) There is less than 1 GB of free space left for personal boxes on the printer hard disk. Delete unneeded jobs stored in personal boxes. (→"Deleting Saved Jobs," User's Guide) 100 jobs are stored in the personal box. Press the Stop button and stop printing. Delete print jobs from the queue. (→"Modifying Queued Jobs (Deleting or Preempting Other Jobs)," User's Guide) Direct sunlight or strong lighting may be shining on the printer and causing the sensor to malfunction. Delete unneeded jobs stored in personal boxes. (→"Deleting Saved Jobs," User's Guide) Take steps to ensure the printer is not used when exposed to direct sunlight or strong lighting. The performance of a sensor Contact your Canon dealer for assistance. inside the printer may be impaired. 41