Canon imagePROGRAF iPF6300S iPF6300S Basic Guide No.2 - Page 47

Error Message Cannot cut paper. Cannot detect papr Roll printing is selected. Error Messages Cause Corrective Action There are sheets left on the Ejection Guide. 1. Press the OK button and remove the paper. 2. Load paper. 3. If Not finished printing. Finish printing remaining jobs? is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. (→ , Loading Rolls in the Printer) There is a foreign object by the Output Tray, obstructing the Cutter Unit. 1. Lift the Top Cover and remove the foreign object. 2. If Not finished printing. Finish printing remaining jobs? is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. You are not using the printer under the recommended environmental conditions for the paper. Use the printer only where the recommended environmental conditions for the paper are met. Note that various environmental conditions are recommended for various types of paper. For details on the recommended environmental conditions, see the Paper Reference Guide. (→"Types of Paper," User's Guide) You are using paper that is not compatible with automatic cutting. 1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll. (→"Specifying the Cutting Method for Rolls," User's Guide) For information about paper that is compatible with automatic cutting, see the Paper Reference Guide. (→"Types of Paper," User's Guide) 2. Press the OK button and remove the paper. In other cases, the Cutter Unit may be damaged. Contact your Canon dealer for assistance. The printer could not detect the paper. Reload the paper as follows. 1. Remove the paper and press the OK button. 2. Reload the paper. (→ , Loading Sheets in the Printer) (→ , Loading Rolls in the Printer) You have attempted to print on a roll, but no roll is loaded. Press ▲ or ▼ to select Load Roll Paper, and then press the OK button. Load the roll, and then print. (→ , Loading Rolls on the Roll Holder) (→ , Loading Rolls in the Printer) Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing. 47