Cisco 1760 Hardware Installation Guide - Page 79

Appendix B Cabling Specifications Console Cable and Adapter Console Cable and Adapter A console cable is provided with your router. Use this cable to connect the router to a PC or terminal. A DB-9-to-DB-25 adapter is also provided for connecting the router to a modem, using the console cable. Table B-3 describes the wiring for the console port and the console cable. This table also includes pinouts for the DB-9-to-DB-25 adapter. Table B-3 Console Cable and Adapter Pinouts Console (DTE) Signal RTS DTR TXD GND GND RXD DSR CTS Console Port RJ-45 Pin 1 2 3 4 5 6 7 8 Console Cable DB-9 Pin 8 6 2 5 5 3 4 7 Adapter DB-25 Pin 5 6 3 7 7 2 20 4 Terminal (DTE) Signal CTS DSR RXD GND GND TXD DTR RTS VIC Cables and Pinouts This section describes the VIC cables and pinouts for foreign exchange station (FXS), foreign exchange office (FXO), and recEive and transMit (or ear and mouth) (E&M) connectors. Use the following cables to connect the VICs to the network: • Standard RJ-11 modular telephone cable to connect FXS VIC ports (gray) to a telephone or fax machine. • Standard RJ-11 modular telephone cable to connect FXO VIC ports (pink) to the PSTN or to a PBX that does not support E&M signaling. 78-13342-03 Cisco 1760 Modular Access Router Hardware Installation Guide B-3