Cisco 3560G 48TS Software Configuration Guide - Page 367

Chapter 18 Configuring DHCP Features Displaying DHCP Information Displaying DHCP Information You can display a DHCP snooping binding table and configuration information for all interfaces on a switch. Displaying a Binding Table The DHCP snooping binding table for each switch has binding entries that correspond to untrusted ports. The table does not have information about hosts interconnected with a trusted port because each interconnected switch has its own DHCP snooping binding table. This example shows how to display the DHCP snooping binding entries for a switch. Switch# show ip dhcp snooping binding MacAddress IpAddress Lease(sec) 00:30:94:C2:EF:35 41.0.0.51 286 00:D0:B7:1B:35:DE 41.0.0.52 237 00:00:00:00:00:01 40.0.0.46 286 00:00:00:00:00:03 42.0.0.33 286 00:00:00:00:00:02 41.0.0.53 286 Type ------dynamic dynamic dynamic dynamic dynamic VLAN ---41 41 40 42 41 Interface gigabitethernet0/1 gigabitethernet0/1 gigabitethernet0/2 gigabitethernet0/2 gigabitethernet0/2 Table 18-2 describes the fields in the show ip dhcp snooping binding command output. Table 18-2 show ip dhcp snooping binding Command Output Field MAC Address IP Address Lease (seconds) Type VLAN Interface Description Client hardware MAC address Client IP address assigned from the DHCP server IP address lease time Binding type; dynamic binding learned by DHCP snooping or statically configured binding VLAN number of the client interface Interface that connects to the DHCP client host 78-16156-01 Catalyst 3560 Switch Software Configuration Guide 18-5