Cisco 3560G 48TS Software Configuration Guide - Page 79

Chapter 3 Getting Started with CMS Displaying CMS Note Figure 3-7 shows a cluster with a Catalyst 3550 switch as the command switch. Refer to the release notes for a list of switches that can be members of a cluster with a Catalyst 3560 switch as the command switch. Note On Catalyst 1900 and Catalyst 2820 switches, CMS is referred to as Device Manager (also referred to as Switch Manager). Device Manager is for configuring an individual switch. When you select Device Manager for a specific switch in the cluster, you launch a separate CMS session. The Device Manager interface can vary among the Catalyst switch platforms. Topology View When CMS is launched from a command switch, the Topology view appears by default. (This view is available only when CMS is launched from a command switch.) When you click the topology button on the tool bar, the Topology view displays the command switch (indicated by the *CMD* label) and the devices that are connected to it, as shown in Figure 3-8. You can right-click on a switch or link icon to display a menu for that icon. Figure 3-8 Topology View and Device Popup Menus 1 2 3 4 98675 1 Link popup menu 2 Command switch 3 Command switch popup menu 4 Cluster member popup menu 78-16156-01 Catalyst 3560 Switch Software Configuration Guide 3-15