Cisco 3560G 48TS Software Configuration Guide - Page 67

Chapter 3 Getting Started with CMS Understanding CMS • The toolbar provides buttons for commonly used switch and cluster configuration options and information windows such as legends and online help. Table 3-1 lists the toolbar options from left to right on the toolbar. Table 3-1 Toolbar Buttons Toolbar Option Icon Task Print Print a CMS window or help file. Preferences1 Save Configuration2 Software Upgrade2 Port Settings1 Set CMS display properties, such as polling intervals, the views to open at CMS startup, and the color of administratively shutdown ports. Save the configuration of the cluster or a switch to Flash memory. Upgrade the software for the cluster or a switch. Display and configure port parameters on a switch. VLAN1 Display VLAN membership, assign ports to VLANs, and change the administration mode. Inventory Display the device type, the software version, the IP address, and other information about a switch. Refresh Update the views with the latest status. Front Panel Display the Front Panel view. Topology3 Display the Topology view. Topology Options3 Save Topology Layout 2 3 Legend Select the information to be displayed in the Topology view. Save your arrangement of the cluster icons in the Topology view to Flash memory. Display the legend that describes the icons, labels, and links. Help for Active Window Display the help for the active, open window. You can also click Help from the active window or press the F1 key. 1. Not available in read-only mode. For more information about the read-only and read-write access modes, see the "Privilege Levels" section on page 3-7. 2. Some options from this menu option are not available in read-only mode. 3. Available only from a cluster-management session. 78-16156-01 Catalyst 3560 Switch Software Configuration Guide 3-3