Cisco AIR-AP521G-A-K9 Configuration Guide - Page 118

Typical Voice VLAN Data, Create VLAN Pop-Up Message

Get Cisco AIR-AP521G-A-K9 - 521 Wireless Express Access Point PDF manuals and user guides
UPC - 882658161988
View all Cisco AIR-AP521G-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 118 highlights

Adding a Voice-Enabled VLAN Chapter 9 Adding Voice Access with Web Authentication Note For Voice VLAN types, the VLAN name field is set with a predefined VLAN name that is based on the selected VLAN type. It cannot be changed. b. From the Port list, select a port (1 or 2) for the VLAN. The default is 1. c. In the IP Address field, enter an IP address for the VLAN. d. From the Subnet Mask list, accept the default or click the drop-down arrow and choose the subnet mask for the VLAN. The default is 255.255.255.0. e. In the Gateway IP Address field, enter the IP address of the default gateway. f. In the DHCP Server IP Address field, enter the IP address of the DHCP server. g. When you complete this window (see Figure 9-4), click OK to save your changes and to close the window. Figure 9-4 Typical Voice VLAN Data A create VLAN pop-up message (Figure 9-5) appears. Figure 9-5 Create VLAN Pop-Up Message Step 4 Click OK and Figure 9-6 appears and lists the new voice VLAN. Cisco 500 Series Wireless Express Mobility Controller Configuration Guide 9-4 OL-15283-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
9-4
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
OL-15283-01
Chapter 9
Adding Voice Access with Web Authentication
Adding a Voice-Enabled VLAN
Note
For Voice VLAN types, the VLAN name field is set with a predefined VLAN name that is
based on the selected VLAN type. It cannot be changed.
b.
From the Port list, select a port (1 or 2) for the VLAN. The default is 1.
c.
In the IP Address field, enter an IP address for the VLAN.
d.
From the Subnet Mask list, accept the default or click the drop-down arrow and choose the subnet
mask for the VLAN. The default is 255.255.255.0.
e.
In the Gateway IP Address field, enter the IP address of the default gateway.
f.
In the DHCP Server IP Address field, enter the IP address of the DHCP server.
g.
When you complete this window (see
Figure 9-4
), click
OK
to save your changes and to close the
window.
Figure 9-4
Typical Voice VLAN Data
A create VLAN pop-up message (
Figure 9-5
) appears.
Figure 9-5
Create VLAN Pop-Up Message
Step 4
Click
OK
and
Figure 9-6
appears and lists the new voice VLAN.