Cisco AIR-AP521G-A-K9 Configuration Guide - Page 125

tkip see, Voice CAC type, Wireless MultiMedia Policy, CAC AP and Client,

Get Cisco AIR-AP521G-A-K9 - 521 Wireless Express Access Point PDF manuals and user guides
UPC - 882658161988
View all Cisco AIR-AP521G-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 125 highlights

Chapter 9 Adding Voice Access with Web Authentication Creating a New SSID for the Voice VLAN Step 8 c. Skip to Step 9 to finish the configuration. If you choose WPA-PSK, WPA2, or WPA2-PSK security, perform these steps: a. Click the Encryption drop-down arrow and choose aes or tkip (see Figure 9-15). Note The authentication is WPA-PSK, WPA2-PSK, or WPA2-PSK, corresponding to the security type. b. Enter the WPA pre-shared key (8 to 63 characters long). Figure 9-15 Configuring WPA2-PSK Security Type Step 9 From the Voice CAC type area, select Wireless MultiMedia Policy, which requires client devices to use WMM, or select 7920 CAC (AP and Client), which supports Cisco 7920 IP telephones on your network. The default setting is Wireless Multimedia Policy. Note Do not select Wireless Multimedia Policy if you use Cisco 7920 phones on your network. Step 10 When finished, click OK and the WLANs Window (Figure 9-16) reappears with the voice WLAN SSID added. OL-15283-01 Cisco 500 Series Wireless Express Mobility Controller Configuration Guide 9-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
9-11
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
OL-15283-01
Chapter 9
Adding Voice Access with Web Authentication
Creating a New SSID for the Voice VLAN
c.
Skip to
Step 9
to finish the configuration.
Step 8
If you choose WPA-PSK, WPA2, or WPA2-PSK security, perform these steps:
a.
Click the Encryption drop-down arrow and choose
aes
or
tkip (see
Figure 9-15
)
.
Note
The authentication is WPA-PSK, WPA2-PSK, or WPA2-PSK, corresponding to the security
type.
b.
Enter the WPA pre-shared key (8 to 63 characters long).
Figure 9-15
Configuring WPA2-PSK Security Type
Step 9
From the
Voice CAC type
area, select
Wireless MultiMedia Policy
, which requires client devices to
use WMM, or select
7920 CAC (AP and Client)
, which supports Cisco 7920 IP telephones on your
network. The default setting is Wireless Multimedia Policy.
Note
Do not select Wireless Multimedia Policy if you use Cisco 7920 phones on your network.
Step 10
When finished, click
OK
and the WLANs Window (
Figure 9-16
) reappears with the voice WLAN SSID
added.