Cisco AIR-AP521G-A-K9 Configuration Guide - Page 30
Step 2: Prepare a Device Window, The Step 4: Connect your device to your PC/Laptop
UPC - 882658161988
View all Cisco AIR-AP521G-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Adding a New Controller Chapter 2 Adding a WLC526 Controller and LAP521 Access Points Figure 2-4 Step 2: Prepare a Device Window Step 2 Verify that an Ethernet cable is not connected to any of the controller ports and click Next. The Step 3: Power up a device window appears (see Figure 2-5). Figure 2-5 Step 3: Power Up Device Widow Step 3 Perform these operations: a. Connect an AC power cable to the controller. b. When the power LED turns green, click Next. The Step 4: Connect your device to your PC/Laptop window appears (see Figure 2-6). Cisco 500 Series Wireless Express Mobility Controller Configuration Guide 2-4 OL-15283-01
2-4
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
OL-15283-01
Chapter 2
Adding a WLC526 Controller and LAP521 Access Points
Adding a New Controller
Figure 2-4
Step 2: Prepare a Device Window
Step 2
Verify that an Ethernet cable is not connected to any of the controller ports and click
Next
. The Step 3:
Power up a device window appears (see
Figure 2-5
).
Figure 2-5
Step 3: Power Up Device Widow
Step 3
Perform these operations:
a.
Connect an AC power cable to the controller.
b.
When the power LED turns green, click
Next.
The Step 4: Connect your device to your PC/Laptop
window appears (see
Figure 2-6
).