Cisco SPA502G User Guide - Page 24

Installing Your Phone Connecting the Power 2 Reverse the Handset Retention Tab If you mount the phone to a vertical surface, you must reverse the handset retention tab on the phone body so that the handset does not fall off the phone when it is placed on the cradle. STEP 1 Push the latch in. STEP 2 Slide the retention tab up until it detaches from the phone. STEP 3 Rotate the tab 180° and re-insert into the phone base. The tab now catches the slot in the handset when the handset is placed onto the cradle. Connecting the Power If you are using an external power source, insert one end of the power cord into an outlet and insert the other end of the power cord into the power port on the phone body. Cisco Small Business IP Phone SPA 50X User Guide (SPCP) 23