D-Link DES-3326S Reference Manual - Page 116
send messages to the remote host.
UPC - 790069242755
View all D-Link DES-3326S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual create syslog host local4 − Specifies that local use 4 messages will be sent to the remote host. This corresponds to number 20 from the list above. local5 − Specifies that local use 5 messages will be sent to the remote host. This corresponds to number 21 from the list above. local6 − Specifies that local use 6 messages will be sent to the remote host. This corresponds to number 22 from the list above. local7 − Specifies that local use 7 messages will be sent to the remote host. This corresponds to number 23 from the list above. udp_port − Specifies the UDP port number that the syslog protocol will use to send messages to the remote host. ipaddress − Specifies the IP address of the remote host where syslog messages will be sent. Restrictions state [enabled/disabled] − Allows the sending of syslog messages to the remote host, specified above, to be enabled and disabled. Only administrator-level users can issue this command. Example Usage: 116 Network Monitoring Commands