D-Link DES-3326S Reference Manual - Page 121
DES-3326SR:4#config syslog host all severity all facility local0, Command: config syslog host all
UPC - 790069242755
View all D-Link DES-3326S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual config syslog host number that the syslog protocol will use to send messages to the remote host. ipaddress − Specifies the IP address of the remote host where syslog messages will be sent. state [enabled/disabled] − Allows the sending of syslog messages to the remote host, specified above, to be enabled and disabled. Restrictions Only administrator-level users can issue this command. Example Usage: To configure a syslog host: DES-3326SR:4#config syslog host all severity all facility local0 Command: config syslog host all severity all facility local0 Success. DES-3326SR:4# Network Monitoring Commands 121
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
Network Monitoring Commands
121
config syslog host
number that the syslog protocol will use to send
messages to the remote host.
ipaddress <ipaddr>
-
Specifies the IP address of
the remote host where syslog messages will be
sent.
state [enabled/disabled]
-
Allows the sending of
syslog messages to the remote host, specified
above, to be enabled and disabled.
Restrictions
Only administrator-level users can issue this
command.
Example Usage:
To configure a syslog host:
DES-3326SR:4#config syslog host all severity all facility local0
Command: config syslog host all severity all facility local0
Success.
DES-3326SR:4#