D-Link DES-3326S Reference Manual - Page 328
config ospf ipif
UPC - 790069242755
View all D-Link DES-3326S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 328 highlights
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual config ospf ipif Purpose Used to configure the OSPF interface settings. Syntax config ospf ipif {area /priority /hello_interval /dead_interval /authentication [none/simple /md5 ]/metric /state [enabled/disabled]} Description This command is used to configure the OSPF interface settings. Parameters − The name of the IP interface. priority − The priority used in the election of the Designated Router (DR). A number between 0 and 255. metric − The interface metric (1 to 65535). Entering a 0 will allow automatic calculation of the metric. hello_interval − Allows the specification of the interval between the transmission of OSPF Hello packets, in seconds. Between 5 and 65535 seconds can be specified. The Hello Interval, Dead Interval, Authorization Type, and Authorization Key should be the same for all routers on the same network. dead_interval − Allows the specification of the length of time between the receipt of Hello packets from a neighbor 328 OSPF Configuration Commands