D-Link DES-3326S Reference Manual - Page 84

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual show snmp host Purpose Used to display the recipient of SNMP traps generated by the switch's SNMP agent. Syntax show snmp host {} Description The show snmp host command is used to display the IP addresses and configuration information of remote SNMP managers that are designated as recipients of SNMP traps that are generated by the switch's SNMP agent. Parameters − The IP address of a remote SNMP manager that will receive SNMP traps generated by the switch's SNMP agent. Restrictions None. Example Usage: To display the currently configured SNMP hosts on the switch: DES-3326SR:4#show snmp host Command: show snmp host SNMP Host Table Host IP Address SNMP Version Community Name 10.48.76.23 V2c private 10.48.74.100 V3 authpriv public Total Entries: 2 84 Network Management Commands